2.
3.
Coat lips of seals on input and output shafts with
ATF.
5. Double check to ensure that there is no shaft
clearance on all three shafts. Refer back to pre-
vious steps if necessary, and use dial indicator.
Apply a thin layer of Loctite 515 Sealer to ma-
chined surfaces on housing halves. Reinstall in-
put half of housing. Ensure locator pins are prop-
erly positioned.
6. Remove intermediate shaft hex plug. Apply a
drop of Quicksilver Loctite Type A to threads and
reinstall in housing. Tighten securely.
b
a
73041
73019
CONTROL BLOCK
1.
Ensure piston rings are in place and the key is in
keyway. Align key on shaft with keyway in control
block.
a - Locator Pins
b - Machined Surface
4.
Install bolts and lockwashers and torque to 36 lb.
ft. (49 N·m).
2. Install new gasket between control block and
housing.
b
a
73033
27666
a - Key
b - Piston Rings
3.
Carefully push control block onto input shaft.
Index
8D-40 - HURTH V-DRIVE TRANSMISSION
90-823224--2 796
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1993, 1994, 1995, 1996, 1997 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.5 out of 5)
Marine readers have rated 1993 1997 Mercury-MerCruiser GM V8 454 CID 7.4L and 502 CID 8.2L Marine Engines Service Manual Number 16 4.5 out of 5.0 based on 4 product reviews. Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you