5000
SERIES (8° DOWN ANGLE AND V-DRIVE)
IMPORTANT: The distance between studs (Di-
mension “C”) shown in the following illustration
is set at 7-1/8 in. (318 mm).
For Left-Hand Propeller Shaft Rotation: Shift
cable hookup at remote control must result in shift
cable end guide moving in direction “A” when remote
control handle is placed in forward position.
c
b
b
For Right-Hand Propeller Shaft Rotation: Shift
cable hookup at remote control must result in shift
cable end guide moving in direction “B” when remote
control handle is placed in forward position.
d
a
23242
73284
Remote control must provide a total shift cable travel
(at transmission end) of at least 2-3/4 in. (70 mm).
This is necessary to position transmission shift lever
fully in the forward and reverse gear positions. Insuf-
ficient shift cable travel will cause transmission to slip
and eventually fail.
8
° Down Angle Shown (V-Drive Similar)
a - Shift Lever
b - Anchor Stud
c - Dimension Between Studs - 7-1/8 In. (318 mm)
d - Shift Cable Bracket
1.
Connect and adjust Quicksilver shift cable(s) as
outlined following:
a
!
WARNING
72602
Avoid serious injury or property damage caused
by improper shifting. Anchor stud for shift cable
must be installed in the correct hole.
a - 2-3/4 In. (70 mm) Minimum
a. Be certain anchor stud is installed in the front
hole as shown in the illustration following.
b
a
73284
a - Shift Cable Bracket
b - Anchor Stud in Front Hole
Index
90-823224--2 796
MIE MODELS - VELVET DRIVE TRANSMISSIONS - 2C-13
Product Specification
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
Model Year | 1993, 1994, 1995, 1996, 1997 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you