1993 1997 Mercury-MerCruiser GM V8 454 CID 7.4L and 502 CID 8.2L Marine Engines Service Manual Number 16

8.
Start engine and inspect for leaks.
IMPORTANT: Observe the following information
to ensure complete draining of cooling system.
a
Engine must be as level as possible.
A wire should be repeatedly inserted into  all
drain holes  to ensure there  are no  obstruc-
tions in passages.
b
c
IMPORTANT: To prevent threads in manifolds, el-
bows and cylinder blocks  from rusting out dur-
ing  storage,  reinstall  plugs  using  Quicksilver
Perfect Seal on threads. Never leave drain plugs
out during storage.
d
NOTE: If  possible, place  a container  under drains
and hoses to prevent water from draining into boat.
e
71758
MCM (Stern Drive) Models
NOTICE
a -  Housing
b -  O-Ring
c  - Thermostat (Stainless Steel)
d -  Spacer
Referto“DrainingPrecautions,”inthissection,
BEFORE proceeding.
e -  Gasket
1.
2.
Ensure engine is as level  as possible to ensure
complete draining of cooling system.
Draining Seawater Cooling
System
Remove drain  plugs (port  and starboard)  from
cylinder block.
Draining Precautions
!
CAUTION
If boat is  in the water,  seacock, if so  equipped,
must remain closed until engine is to be restarted
to prevent water from flowing  back into cooling
system and/or  boat. If  boat is  not fitted  with a
seacock, water inlet hose must be disconnected
and plugged to prevent water from flowing back
into
cooling
system
and/or
boat.
As
a
precautionary   measure,  attach   a  tag   to  the
ignition switch or steering wheel of the boat with
the warning that the seacock must be opened or
the water inlet hose reconnected prior to starting
the engine.
72609
a
Starboard Side Shown (Port Similar)
a -  Drain Plug
NOTICE
3.
Repeatedly  clean out  drain holes  using  a stiff
piece  of  wire.  Do  this   until  entire  system  is
drained.
For cold  weather or extended  storage infor-
mation and procedures, refer to SECTION 1B.
NOTE: It  may be  necessary to  lift, bend,  or lower
hoses to allow water to drain completely when hoses
or drain plugs are disconnected.
Index
90-823324--2  796
SEAWATER COOLED SYSTEMS - 6A-41
Product Specification
CategoriesMercury MerCruiser Manuals
Tags,
Model Year1993, 1994, 1995, 1996, 1997
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 930 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(4 votes, average: 4.5 out of 5)
Marine readers have rated 1993 1997 Mercury-MerCruiser GM V8 454 CID 7.4L and 502 CID 8.2L Marine Engines Service Manual Number 16 4.5 out of 5.0 based on 4 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

1993 1997 Mercury-MerCruiser GM V8 454 CID 7.4L and 502 CID 8.2L Marine Engines Service Manual Number 16 SKU UPC Model
Nick on Aug 13, 2018. Exactly what I was looking for!

Hugely helpful service manual! Perfect. Thank you!


Sonthaya Traipug on May 04, 2018. Freelance Yachts Service

Manuals are all Important for Technician


Glenn on Dec 02, 2015. Nice

This book is invaluable if you do your own repairs. Great book.


Joseph on Oct 04, 2015. 1997 7.4l Bravo

Could not find a copy until a search brought me here.
Excellent print.
Thank you


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website