PREASSEMBLY OF OUTPUT HALF OF
HOUSING
!
WARNING
Use care in handling housing once it has been
heated. Severe burns could result. Use special
protective gloves to handle housing.
IMPORTANT: If tapered roller bearing cups were
removed, ensure output shaft seal IS NOT in
place, as it will be necessary to heat housing
prior to installing bearing cups.
2.
Heat bearing bores of housing using a torch lamp
and install bearing cups using a suitable man-
drel.
IMPORTANT: The tapered roller bearing cup on
the input shaft (control block end) is properly po-
sitioned by bottoming out on the face of the con-
trol block assembly. It will be necessary to tem-
porarily install control block to install this
tapered roller bearing cup.
b
1.
Temporarily install control block on outer hous-
ing. Tighten bolts securely.
a
a
27681
a - Bearing Cups
b - Torch Lamp
3.
Allow housing to cool (DO NOT cool with water)
and then tap bearing cup with suitable mandrel to
ensure it is properly seated.
4.
Remove control block assembly.
27682
b
a
27666
a - Input Shaft Bearing Cup
b - Control Block Face
Index
90-823224--2 796
HURTH DOWN ANGLE TRANSMISSION - 8C-31
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1993, 1994, 1995, 1996, 1997 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.5 out of 5)
Marine readers have rated 1993 1997 Mercury-MerCruiser GM V8 454 CID 7.4L and 502 CID 8.2L Marine Engines Service Manual Number 16 4.5 out of 5.0 based on 4 product reviews. Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you