Final Assembly
4. Install bolts and lockwashers and torque to 36 lb.
ft. (49 N·m).
INPUT SHAFT SEAL
1.
Push new seal onto special mandrel. Ensure seal
will be positioned with lip of seal facing inward.
Drive seal uniformly into bore of housing to the
point that it is countersunk .040 in. (1 mm) with
reference to housing surface.
71064
5.
6.
Double check to ensure that there is no shaft
clearance on all three shafts. Refer back to pre-
vious steps if necessary, and use dial indicator.
Remove intermediate shaft hex plug. Apply a
drop of Quicksilver Loctite 8831 to threads and
reinstall in housing. Tighten securely.
27670
2.
3.
Coat lips of seals on input and output shafts with
ATF.
Apply a thin layer of Loctite 515 Sealer to ma-
chined surfaces on housing halves. Reinstall in-
put half of housing. Ensure locator pins are prop-
erly positioned.
a
b
71065
71053
a - Locator Pins
b - Machined Surface
Index
90-823224--2 796
HURTH DOWN ANGLE TRANSMISSION - 8C-41
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1993, 1994, 1995, 1996, 1997 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.5 out of 5)
Marine readers have rated 1993 1997 Mercury-MerCruiser GM V8 454 CID 7.4L and 502 CID 8.2L Marine Engines Service Manual Number 16 4.5 out of 5.0 based on 4 product reviews. Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you