5.
Apply a thin coat of Quicksilver Loctite 8831 to
outside diameter of new bearing housing front oil
seal and press seal into housing (with seal lip fac-
ing inward) until it bottoms out.
IMPORTANT: Pulley hub must be pressed onto
shaft to exact dimension on pumps with stamped
steel mounting bracket as this establishes prop-
er drive belt alignment.
7.
Clamp bearing housing in a soft jaw vise with
flange end up.
8.
Coat quad ring seal with Quicksilver 2-4-C Ma-
rine Lubricant With Teflon and install into groove
in housing.
a
72662
a - Front Oil Seal
IMPORTANT: Be sure to support impeller end of
pump shaft when installing pulley hub in next
step to prevent placing a load on bearings.
a
72656
6.
Apply Quicksilver Special Lubricant 101 to pump
shaft. Using an arbor press and appropriate tool,
press pulley hub onto pump shaft to dimension
shown.
a
a
72655
72664
a - Quad Ring Seal
a - .260 Inch (6.6 mm)
Index
90-823324--2 796
SEAWATER COOLED SYSTEMS - 6A-29
Product Specification
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
Model Year | 1993, 1994, 1995, 1996, 1997 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you