5.
If transmission fluid level was extremely low,
carefully check transmission, fluid cooler and
hoses for leaks.
Filling Transmission
IMPORTANT: Use only Automatic Transmission
Fluid (ATF) as recommended in “Lubricants/Sea-
lants.”
Draining Transmission
1.
Fill transmission to proper level, through oil filter
cavity. (Refer to “Capacity.”)
1.
Clean the exterior of transmission before disas-
sembly.
2.
Install filter as follows:
NOTE: Later model Hurth transmissions will be
equipped with an allen head socket screw on the oil
filter cover.
a. Coat O-ring on filter cover with transmission
fluid.
2.
Remove oil filter from housing by turning (coun-
terclockwise) and pulling at the same time.
a
b
27666
27662
a - Filter Cover
b - O-Ring
!
CAUTION
a - Set Screw (Later Models)
Transmission fluid filter and cover must be prop-
erly seated to avoid fluid foaming and/or loss of
fluid, thus resulting in decreased efficiency and/
or damage to transmission.
3.
Remove drain plug from transmission and allow
fluid to drain. Reinstall drain plug and tighten se-
curely.
a
73013
a - Drain Plug
Index
8D-8 - HURTH V-DRIVE TRANSMISSION
90-823224--2 796
Product Specification
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
Model Year | 1993, 1994, 1995, 1996, 1997 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you