6.
Remove tapered roller bearing, butting ring and
gear from piston end of shaft using special tool as
shown. Press all components off at the same
time. Then, remove needle bearings.
1. Position snap ring compression tool on clutch as-
sembly so that compression screws are centered
over slots in clutch housing.
2.
Remove end disc and snap ring as follows:
a. Tighten all compression screws until a slight
resistance is felt.
b. Tighten compression screws evenly (approx-
imately 1/2 turn at a time).
c. Tap up lightly on bottom edge of compression
tool until snap ring pops up and out of groove
in clutch housing.
b
27673
a
CLUTCH DISCS
NOTE: Discs on both sides of clutch are removed in
the same manner.
c
IMPORTANT: Reference marks are placed on the
clutch housing and end disc to aid in locating the
snap ring opening.
27674
a - Snap Ring Compression Tool
b - Compression Screws (6)
c - Slots
a
27675
27675
a - Reference Marks
Index
8D-22 - HURTH V-DRIVE TRANSMISSION
90-823224--2 796
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1993, 1994, 1995, 1996, 1997 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.5 out of 5)
Marine readers have rated 1993 1997 Mercury-MerCruiser GM V8 454 CID 7.4L and 502 CID 8.2L Marine Engines Service Manual Number 16 4.5 out of 5.0 based on 4 product reviews. Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you