Transmission Shift Lever
Check transmission fluid before starting engine each
day, as follows:
The lever has three holes as illustrated following.
1.
Remove dipstick. Check fluid level as indicated
on dipstick. Fluid level may be somewhat over full
mark, as some of the fluid from transmission fluid
cooler and hoses may have drained back into
transmission. If low, add specified transmission
fluid to bring level up to full mark on dipstick.
a
b
c
71304
Shift Cable Adjustment
72526
Refer to Section 2E - “MIE Models - Velvet Drive
Transmissions.”
a - Dipstick
b - Full Mark
c - Dipstick Tube
IMPORTANT: To accurately check fluid level, en-
gine must be run at 1500 RPM for 2 minutes im-
mediately prior to checking level.
Checking Transmission
Fluid Level
2.
Start engine and run at 1500 RPM for 2 minutes
to fill all hydraulic circuits.
IMPORTANT: Use only specified transmission
fluid (see “Specifications”).
IMPORTANT: Be sure to push dipstick all the way
down into dipstick tube when checking fluid lev-
el.
3.
Stop engine and quickly check fluid level. Add
transmission fluid, if necessary, to bring level up
to full mark on dipstick.
4.
5.
Reinstall dipstick.
If transmission fluid level was extremely low,
carefully check transmission, fluid cooler and
hoses for leaks.
Index
8B-4 - VELVET DRIVE V-DRVIE TRANSMISSION
90-823224--2 796
Product Specification
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
Model Year | 1993, 1994, 1995, 1996, 1997 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you