IMPORTANT: The BLK/YEL lead is not used. It
should be well insulated and taped to harness.
6. If continuity exists when in the OPEN (not de-
pressed) state, replace panel button.
1.
2.
3.
Disconnect switch leads.
Connect an ohmmeter to switch leads.
Audio Warning System
Switch should have continuity with toggle in the
RUN position and no continuity with toggle in the
OFF position.
NOTICE
For repair procedures on Fuel Injection
Engines, refer to Section 5C.
Start/Stop Switch
Buzzer
TESTING
!
WARNING
!
WARNING
The following test involves the use of electricity.
Failure to follow appropriate procedures can
cause burns or shock which can result in severe
personal injury or death.
Disconnect battery leads at battery before test-
ing.
1.
2.
Disconnect battery leads.
Check for continuity between the terminals onthe
start switch with a continuity meter.
TESTING
1.
2.
3.
Turn key to RUN position (engine off).
Wait 7 to 14 seconds for horn to sound.
If horn does not sound:
a. Connect jumper wires as shown.
b. If horn does not sound, replace it.
If horn worked in Step 3:
4.
a. Connect jumper wires as shown.
b. Repeat Step 2.
72763
3.
4.
No continuity should exist.
Depress switch button and continuity should
exist.
5.
Check stop switch in the same manner.
Index
90-823224--2 796
INSTRUMENTATION - 4D-11
Product Specification
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
Model Year | 1993, 1994, 1995, 1996, 1997 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you