Suction Pipe
Reinstall suction pipe seal in bottom of oil filter
bore. Coat seal with ATF.
!
WARNING
1.
Use care in handling housing, once it is heated
with torch lamp. Severe burns could result. Use
special protective gloves when handling hous-
ing.
2.
Heat bearing bores of housing using a torch lamp
and install bearing cups using a suitable mandrel.
b
a
a
27660
a - Seal
27681
a - Bearing Cups
b - Torch Lamp
2.
Reinstall suction pipe. Place one drop of Loctite
Type A on screw threads. Then secure suction
pipe down with retainer plate. Tighten screws se-
curely.
3.
Allow housing to cool (DO NOT cool with water)
and then tap bearing cup with suitable mandrel to
ensure it is properly seated.
3. Bend tabs down over screws.
4.
Remove control block assembly.
Output Shaft Seal
1.
If bearing were not replaced and no shimming
is required, push new seal onto special mandrel.
Ensure seal will be positioned with lip of seal fac-
ing inward. Drive seal uniformly into bore of hous-
ing to the point that it is countersunk .040 in. (1
mm) with reference to housing surface.
a
73027
73025
a - Seal
Index
8D-30 - HURTH V-DRIVE TRANSMISSION
90-823224--2 796
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1993, 1994, 1995, 1996, 1997 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(4 votes, average: 4.5 out of 5)
Marine readers have rated 1993 1997 Mercury-MerCruiser GM V8 454 CID 7.4L and 502 CID 8.2L Marine Engines Service Manual Number 16 4.5 out of 5.0 based on 4 product reviews. Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you