3.
4.
Check other two rectifiers in same manner.
Condenser
Replace assembly if any of the rectifiers is
shorted or open.
1.
Using Magneto Analyzer (P/N 91-76032) and ac-
companying instructions, perform the following
condenser tests:
a. Condenser Capacity Test (must be .5 mfd)
b. Condenser Short or Leakage Test
c. Condenser Series Resistance Test
2.
Replace condenser if test results are not within
specifications.
Reassembly
1.
Solder positive/negative rectifier and diode-trio
assembly to stator. Connect leads to original lo-
cation as identified during disassembly.
73103
5.
Using an ohmmeter (set on Rx1 scale), check for
continuity between the common side of the
diodes and one of the terminals on other side of
the diode. Reverse ohmmeter leads and re-
check. Continuity should be observed in one di-
rection (polarity) only.
6.
7.
Check other two diodes in same manner.
Replace diode-trio if any of the diodes is shorted
or open.
73100
2.
Install rotor to front end frame.
73104
Index
4C-34 - CHARGING SYSTEM
90-823224--2 796
Product Specification
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
Model Year | 1993, 1994, 1995, 1996, 1997 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Hugely helpful service manual! Perfect. Thank you!
Manuals are all Important for Technician
This book is invaluable if you do your own repairs. Great book.
Could not find a copy until a search brought me here.
Excellent print.
Thank you