DRIVE SHAFT / PROPELLER SHAFT MODELS
SERVICE MANUAL NUMBER 24
Removal and Installation
1.
2.
Remove drive shaft as outlined following in this section.
If engine must be removed, refer to appropriate instructions in SECTION 2 - “Removal
and Installation.”
Disassembly
IMPORTANT: This disassembly procedure, beginning with Step 1. assumes that
engine does not require removal from boat. If engine removal is required, refer to
SECTION 2 for removal and installation instructions. With engine removed from boat,
proceed with disassembly, beginning with Step 3.
1.
If Engine Is Removed From Boat, Go To Step 3. If Engine Is In Boat: Support rear
of engine with overhead hoist or wooden blocks under the rear of the engine.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Remove stringer bolts (rear engine mounts).
Remove output shaft housing attaching screws, then remove housing.
Remove snap ring, then pull output shaft out of housing.
Remove snap ring from housing.
Using Quicksilver Slide Hammer Puller, remove bearing from housing.
Remove flywheel cover.
Remove flywheel housing.
Remove engine coupling.
Clean and inspect all parts. Replace any damaged parts.
Index
Page 8D-4
90-861327 OCTOBER 1999
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 305 CID, Mercury MerCruiser 350 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Marine readers have rated Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID 4.0 out of 4.0 based on 1 product reviews. Great performance engine.
Class 1