Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID

IGNITION SYSTEM
SERVICE MANUAL NUMBER 24
Testing Pickup Coil
1.
Connect an ohmmeter to either pickup coil lead and the housing. If the reading is NOT
infinite, replace the pickup coil.
2.
Connect an ohmmeter to both pickup coil leads. Flex the leads by hand at the coil and
the connector to locate any intermittent opens. The ohmmeter should read a constant
unchanging value in the 500-1500ohm range. If NOT, replace the pickup coil.
Reassembly
NOTE: When mounting Ignition Module, thoroughly coat bottom of module with Heat Trans-
fer Compound. Failure to do so could result in damage to the module.
1.
Coat bottom of module and module mounting pad (on housing) with Heat Transfer Com-
pound.
2.
3.
4.
5.
6.
Install Ignition Module to housing with two screws. Tighten screws securely.
Install pickup coil, fitting tab at bottom of coil into anchor hole of housing.
Connect pickup coil electrical connector to module, making sure locking tab is in place.
Install shield onto coil.
Install retainer (with teeth facing up) using a 5/8 in. (15 mm) socket centered on retainer.
Using a small hammer, tap the retainer evenly, down onto the distributor housing upper
bushing. Make sure that both teeth are seated in bushing groove. The retainer should
hold shield, pickup coil and pole piece firmly.
a
b
c
76522
d
72919
a  - Hammer
b  - Square Socket, 5/8 in (15 mm)
c  - Square Retainer (Teeth Pointing Up)
d  - Distributor Housing Upper Bushing (With Groove)
7.
Lubricate shaft with grease and install into housing.
8.
Install tang washer, washer and drive gear onto shaft.
9.
Temporarily install rotor on shaft. Align scribe marks on gear, housing, and rotor.
Install roll pin through gear and shaft.
10.
11.
12.
Spin shaft to ensure that teeth on shaft assembly do not contact pole piece.
Install rotor onto shaft, fitting tab of rotor into slot of shaft.
Page 4B-28
90-861327--1   OCTOBER 1999
Product Specification
CategoriesMercury MerCruiser Manuals
Tags,
Model Year1998, 1999, 2000, 2001
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 895 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(1 votes, average: 4 out of 4)
Marine readers have rated Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID 4.0 out of 4.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID SKU UPC Model
Fernando Woll on Dec 09, 2014. Boat Engine

Great performance engine.
Class 1


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website