SERVICE MANUAL NUMBER 24
MIE MODELS
WARNING
Avoid gasoline fire or explosion. Improper installation of brass fittings or plugs into
fuel pump or fuel filter base can crack casting and/or cause a fuel leak.
•
Apply #592 Loctite Pipe Sealant with Teflon to threads of brass fitting or plug.
DO NOT USE TEFLON TAPE.
•
•
Thread brass fitting or plug into fuel pump or fuel filter base until finger tight.
Tighten fitting or plug an additional 1-3/4 to 2-1/4 turns using a wrench. DO NOT
OVERTIGHTEN.
•
Install fuel line. To prevent overtightening, hold brass fitting with suitable
wrench and tighten fuel line connectors securely.
•
Check for fuel leaks.
3.
Connect fuel line from fuel tank(s) to engine. Make certain connection is secure. Check
for leaks.
4.
Connect exhaust system tubes and hoses using at least two hose clamps at each con-
nection.
CAUTION
Avoid exhaust hose failure. Discharge water from exhaust elbow must flow around
entire inside diameter of hose to avoid causing hot spots which could eventually
result in burned-through exhaust hoses. Exhaust hoses and/or tubes must be cor-
rectly connected to exhaust elbows so that they do not restrict the flow of discharge
water from exhaust elbow.
72538
Correct
Incorrect
IMPORTANT: BLACK SCORPION S-pipes must be routed under the transmission
mounts.
a
b
74832
a- S-Pipe
b- Transmission Mount
90-861327--1
OCTOBER 1999
Page 2B-11
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 305 CID, Mercury MerCruiser 350 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Marine readers have rated Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID 4.0 out of 4.0 based on 1 product reviews. Great performance engine.
Class 1