Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID

SERVICE MANUAL NUMBER 24
IGNITION SYSTEM
Timing
Thunderbolt V Models
1.
2.
Connect timing light to number 1 spark plug wire.
Connect a shop tachometer to the engine.
IMPORTANT: Before starting the engine, connect a jumper wire from the ignition tim-
ing lead to a good ground. This has to be done before the ignition key is turned ON
to lock the Ignition Module into Base Timing Mode.
3.
Before starting the engine, connect jumper wire from timing lead to a good ground.
NOTE: The PUR/WHT timing lead is located towards the front of the engine near the fuel
line or near the distributor, as equipped for your model.
4.
5.
6.
Start engine and run at 1300 rpm until it  reaches normal operating temperature.
Disconnect throttle cable from the carburetor.
With engine at idle rpm, adjust the carburetor idle rpm screw to the specified engine idle
rpm.
7.
With  the engine  still  at  idle rpm,  check  the ignition  timing.  If  incorrect, rotate  the
distributor until timing is correct. Torque clamping screw to 18 lb-ft (25 Nm).
8.
Adjust the idle mixture screw. Inward is LEAN, outward is RICH.
Recheck ignition timing.
9.
10.
Stop engine. Remove timing light, jumper wire and shop tachometer.
IMPORTANT: Timing jumper wire has to be removed or the Ignition Module will stay
locked in the Base Timing Mode and it will not be able to advance the ignition timing
correctly when the engine rpm is increased.
11.
12.
13.
Adjust and reinstall throttle cable. Open and close remote control throttle lever to make
sure that the carburetor’s throttle lever  returns against the rpm adjusting screw every
time.
Restart the engine, increase rpm to 1300 then return to idle position slowly and shut the
engine off.  Ensure that the  carburetor throttle lever  came back against  the idle rpm
screw.
Shut engine off.
90-861327--1
OCTOBER 1999
Page 4B-5
Product Specification
CategoriesMercury MerCruiser Manuals
Tags,
Model Year1998, 1999, 2000, 2001
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 895 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(1 votes, average: 4 out of 4)
Marine readers have rated Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID 4.0 out of 4.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID SKU UPC Model
Fernando Woll on Dec 09, 2014. Boat Engine

Great performance engine.
Class 1


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website