HURTH TRANSMISSIONS
SERVICE MANUAL NUMBER 24
Checking Transmission Fluid Level
IMPORTANT: Use only specified transmission fluid; refer to “Transmission Fluid
Specifications.”
IMPORTANT: The fluid level dipstick is located on the port side of transmission. DO
NOT remove T-handle on starboard side of transmission.
Check transmission fluid before starting engine each day, as follows:
1.
Remove dipstick. Check fluid level as indicated on dipstick. Fluid level may be some-
what over full mark, as some of the fluid from transmission fluid cooler and hoses may
have drained back into transmission. If low, add transmission fluid to bring level up to
full mark on dipstick.
27661
Typical Hurth Transmission
IMPORTANT: To accurately check fluid level, engine must be operated at 1500 RPM
for two minutes immediately prior to checking level.
2.
Start engine and operate at 1500 RPM for two minutes to fill all hydraulic circuits.
IMPORTANT: Be sure to push dipstick all the way down into dipstick tube when
checking fluid level.
3.
Stop engine and quickly check fluid level. Add automatic transmission fluid, if necessary,
to bring level up to full mark on dipstick.
4.
5.
Reinstall dipstick.
If transmission fluid level was extremely low, carefully check transmission, fluid cooler
and hoses for leaks.
Index
Page 8C-10
90-861327--1 OCTOBER 1999
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 305 CID, Mercury MerCruiser 350 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Marine readers have rated Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID 4.0 out of 4.0 based on 1 product reviews. Great performance engine.
Class 1