SERVICE MANUAL NUMBER 24
SEAWATER COOLED MODELS
Lubricants / Sealants / Adhesives
Description
Quicksilver Loctite 27131
Part Number
92-809820
Quicksilver Perfect Seal
92-34227--1
92-825407A3
92-816026A2
92-25711--3
92-13872A1
Quicksilver 2-4-C Marine Lubricant With Teflon
Quicksilver High Performance Gear Lube
Quicksilver Liquid Neoprene
Quicksilver Special Lubricant 101
Silicone Sealant Or Equivalent
Shell Alvania No. 2 Grease
Obtain Locally
Specifications
Cooling System Capacity
Engine
U.S. Quart (liter)
All
15 (14.1)
Thermostat
Engine
Specification
All
160°F (71°C)
Seawater Inlet Recommendations
Transom Mounted or Thru-Hull Seawater Pickups and Hose
Water pickup must be large enough to permit sufficient water flow to engine seawater pickup
pump for adequate engine cooling [30 gal. per min. (114 L per min.) minimum]. Pickup also
must supply a positive head while underway.
CAUTION
Do not install water pickup directly in line with propeller, as pickup may create
turbulence and allow air to flow into the “propeller slipstream.” This will cause
propeller ventilation and will adversely affect boat performance.
Water pickup should be located as close to seawater pickup pump inlet as possible and in
an area where an uninterrupted, solid stream of water will flow past when boat is underway.
Connect water pickup to seawater pickup pump inlet with 1-1/4 in. (32 mm) I.D. wire rein-
forced hose of adequate wall thickness to prevent it from collapsing from pump suction. Be
sure to secure hose connections with hose clamps.
Index
90-861327--1
OCTOBER 1999
Page 6A-3
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 305 CID, Mercury MerCruiser 350 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Marine readers have rated Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID 4.0 out of 4.0 based on 1 product reviews. Great performance engine.
Class 1