Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID

MERCARB 2 BARREL CARBURETOR
SERVICE MANUAL NUMBER 24
Cleaning and Inspection
IMPORTANT: DO NOT use a wire or drill to clean jet passages or tubes in carburetor,
as this may enlarge orifices and seriously affect carburetor calibration.
CAUTION
To avoid damage to carburetor DO NOT leave carburetor in immersion type carbure-
tor cleaner for more than two hours.
IMPORTANT: DO NOT clean float bowl gasket surfaces with a gasket scraper or knife,
as sealing bead will be damaged and float bowl replacement will be necessary.
CAUTION
The float assembly,  float needle, accelerator  pump plunger, and fuel  filter MUST
NOT BE immersed in carburetor cleaner, as they will swell, harden, and/or distort.
b
c
a
d
72410
a  - Accelerator Pump Plunger
b  - Float Needle
c  - Fuel Filter
d  - Float Assembly
WARNING
Avoid personal injury by always wearing safety goggles when using compressed
air.
1.
Clean all metal parts in a commercial carburetor cleaner until all deposits have been re-
moved. Follow cleaner manufacturer’s instructions for proper cleaning and rinsing pro-
cedure. Dry parts with compressed air.
2.
Using  compressed air,  blow out  all  passages in  carburetor  to remove  any foreign
material.
3.
4.
Wipe off all parts that cannot be cleaned in carburetor cleaner with a clean, dry cloth.
Carefully inspect all carburetor parts for wear and damage. Pay particular attention to
the following:
a.   Float Needle and Seat: If float needle or seat is worn or damaged, replace with new
needle and seat assembly.
IMPORTANT: Float needle and  seat are factory matched and  tested and should be
replaced as a set only.
b.   Float Assembly and Hinge Pin: Check float density (to see if it  is saturated with
fuel) by comparing weight of float with specifications. If weight is high, float assembly
must be replaced. Check hinge pin and holes for wear.
c.   Fuel and Air Passages: Passages  must be perfectly clean for proper carburetor
operation.
Page 5B-28
90-861327--1   OCTOBER 1999
Product Specification
CategoriesMercury MerCruiser Manuals
Tags,
Model Year1998, 1999, 2000, 2001
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 895 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(1 votes, average: 4 out of 4)
Marine readers have rated Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID 4.0 out of 4.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID SKU UPC Model
Fernando Woll on Dec 09, 2014. Boat Engine

Great performance engine.
Class 1


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website