HURTH TRANSMISSIONS
SERVICE MANUAL NUMBER 24
2.
Place remote control shift lever and transmission shift lever in neutral position.
3.
4.
Remove nuts and washers from shift cable attaching studs.
Locate center of remote control and control shift cable play (backlash), as follows:
a. Check that remote control is in neutral position.
b. Push in on control cable end with enough pressure to remove play and mark position
“a” on tube.
c. Pull out on control cable end with enough effort to remove play and mark position
“b” on tube.
d. Measure distance between marks “a” and “b,” and mark position “c,” halfway
between marks “a” and “b.”
b
c
c
a
22024
5.
6.
Center cable-end play, then adjust cable barrel to align holes in barrel and in cable end
guide with attaching points on transmission.
Temporarily install shift cable. Do not secure at this time.
IMPORTANT: Transmission is fully in gear when shift lever comes to a stop, in either
direction.
7.
Place remote control shift lever in forward gear position. Ensure transmission is fully in
gear, as follows:
a. Hold shift lever in position.
b. Carefully slide shift cable off of anchor points.
c. Attempt to move shift lever further.
8.
Place remote control shift lever in reverse gear position. Again ensure transmission is
fully in gear as follows:
a. Hold shift lever in position.
b. Carefully slide shift cable off of anchor points.
c. Attempt to move shift lever further.
Index
Page 8C-6
90-861327--1 OCTOBER 1999
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 305 CID, Mercury MerCruiser 350 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 4 out of 4)
Marine readers have rated Mercury MerCruiser Engines Service Manual Number 24 GM V-8 305 CID 350 CID 4.0 out of 4.0 based on 1 product reviews. Great performance engine.
Class 1