SERVICE MANUAL NUMBER 24
COLLECTORS
Maintenance
1.
Air Intake Filter (32-17272) must be checked once each year. If filter is clogged or
partially clogged, replace. The filter pad is glued in and may be removed with
needle-nose pliers. Clean surface in casting, apply a single dot of Quicksilver Sound
Blanket Glue to center of casting, and install new filter. Be careful not to coat filter or clog
air intake holes with adhesive.
e
a
d
j
b
c
f
g
e
c
h
k
i
72534
a - Mode Switch
b - Keyway - Install In DOWN Position
c - BROWN Wire To Terminal 3 - Activates Compressor
d - PURPLE Wire - 12 Volt; Connect To 12 Volt Source In Control Panel Area
e - GRAY Wire To Terminal 1 - Activates Solenoid
f - Air Pump
g - Solenoid
h - Check Valve
i - Relief Valve - 30 PSI
j - 2 Ft. (610 mm) Ground Wire - Connect To Terminal - Must Be Grounded To
Engine
k - Air Intake Filter
2.
Lubricate air cylinder-to-silencer pipe flapper at clevis and pin, as needed, with Quick-
silver 2-4-C Marine Lubricant.
a
72778
a - Lubricate Clevis And Pin With Quicksilver 2-4-C Marine Lubricant
90-861327--1
OCTOBER 1999
Page 7C-11
Product Specification
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | Mercury MerCruiser 305 CID, Mercury MerCruiser 350 CID |
Model Year | 1998, 1999, 2000, 2001 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Great performance engine.
Class 1