Repair instructions
1
6b. Models 280, 290 of later manufacture: Install the
thick spacer ring and tighten the plastic insert locknut.
Use a hook spanner wrench.
8. Install the vertical shaft with a 0.35 mm (0.14")
thick shims package (1) consisting of a paper shim
0.25 mm (0.01") between two metal shims 0.05 mm
(0.002")
each.
884830
1
2
3
7.
the needle bearing (3) into the gear housing.
Insert the pinion (1) along with the washer (2) for
9. Install the washer and the nut. Tighten the nut with
a torque of 160 Nm (118 lbf.ft.). Use special tool
884830
on the splined end as a counter hold.
NOTE! Don’t lock just yet.
92
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok