Repair instructions
Vertical shaft
884796
9991801
25.
884796
Remove the outer bearing race using special tools
and handle 9991801.
27. Use a knife puller to remove the bearings one by
one or together.
IMPORTANT! Center the tool carefully. Locate a
pair of wooden blocks underneath the bearing
box to protect the bearing box while pressing out
the bearing race.
IMPORTANT! Use spline socket 3850598 to
protect the splines when pressing off the
bearings
Forward gear
28.
NOTE! There is a spacer pad (1) located between
the roller bearing and the ball bearing. This spacer
pad, however, is smaller than the spacer ring located
above the roller bearing. See point 14b.
26.
Use a knife puller to press off the front roller bear-
ing from the gear.
29.
Remove the ball bearings. Use a knife puller.
104
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok