Repair instructions
Assembly
Oil all moving parts prior to the assembly.
3.
Lubricate the sealing ring abundantly and install it
with the steel edge (small clearance} facing inwards
the gear housing.
5.
Install the balls and the springs (1). Insert a locking
wire (2) in the groove of the cover and compress the
springs as indicated in the picture. Cut off and turn
down the end into the cover recess. The only func-
tion of the locking wire is to hold the spring in posi-
tion while the shift mechanism is being installed in
the gear housing.
4.
lock it with the load pin (3). Make sure that the load
pin centers in the excentric piston.
Insert the excentric piston (1). Install the pin (2) and
6. Install the spring (1), the shift shoe (2) and the
O-ring (3) and coat the contact surfaces with sealing
compound, Volvo Penta part no. 1161099-5 or
Permatex no. 3.
®
65
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok