Repair instructions
884830
11.
Should the contact pattern correspond to that of
picture “B”, reduce the shim thickness for the vertical
shaft and the propeller shaft.
9.
Install special tool 884830 onto the splines end and
turn the gear in the set direction of rotation, clockwise
for left handed propeller. At the same time brake the
movement on the propeller shaft, as forcefully as pos-
sible.
Contact pattern
12.
Should the contact pattern correspond to that of
picture “C”, increase the shim thickness for the verti-
cal shaft and the propeller shaft.
NOTE! If the pinion is moved the gear wheel must be
moved correspondingly in order not to alter the gear
backlash.
10.
Check that the contact pattern on the teeth surfac-
es of the drive side coincide with that of the picture
A”, which is correct. The contact pattern should be
“
positioned in the middle of the tooth but displaced to-
wards the small end.
97
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok