Volvo Penta 280 285 290 DP SP A B C Workshop Manual

Sterndrive extensions
Tightening torques – see the picture!
The  1" extension
Install the cover over the shift mechanism.
Coat the contact surfaces with a sealant. Use the 3
new O-rings and the oil pipe from the extension kit. In-
stall the extension on the lower gear housing.
If the paint has been damaged, use touch-up paint to
repair. See under Accessories – Aquamatic.
Install the locking ring in the splines sleeve. Turn the
end with locking ring downwards and then install the
sleeve on the lower vertical shaft.
Fill up with lubrication oil. Regarding oil quantity and
oil quality, see chapter Technical Data. Check the oil
level with the sterndrive fully lowered. Let a few min-
utes pass after you have shut down the engine before
you start checking the oil level. Push down the oil dip-
stick as far as possible, however, without tightening it.
Lift up the oil dipstick and register the oil level. Top-up
if necessary.
Install the stud screws ‘D’ in the intermediate housing
E’.
Coat the contact surfaces with a sealant and place
the intermediate housing on the extension.
NOTE! Do not forget the O-rings! Tighten the bolts ‘F
and nuts ‘G’ (1" extension) evenly and in diagonal se-
quence. Use the existing washers ‘H’ on the nuts. On
the 4" extension the screws ‘K’ and the washers ‘L
are used instead of nuts and washers.
NOTE! Do not forget the small O-ring underneath the
oil dipstick head.
161
Product Specification
CategoriesVolvo Penta Manuals
Tags, , , , , , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 181 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Volvo Penta 280 285 290 DP SP A B C Workshop Manual SKU UPC Model
Ole Nissen on Aug 06, 2018. Engineer

Problem Winther noise when turne


Darrell on Jun 01, 2018.

not pulling water so hope I find the info


scott gjerdingen on Mar 20, 2016. look forward to manual access

Kinda a premature review, at this point I am asked to review the manual before ever seeing it?


Bobby V. Johnson on Sep 19, 2015. OutDrive repair

Great step by step information.


Shawn on Mar 15, 2015.

thank you


Clint Fewell on Jul 23, 2013.

needed it bad


thomas svensson on Apr 05, 2013.



thomas svensson on Apr 05, 2013.



al on Dec 11, 2012. ok

ok


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website