Repair instructions
884348
B
37.
884348
Using a depth gauge, measure “B” in special tool
. Subtract measurement “A” from measure-
ment “B”.
B – A = positive result ( clearance dimension)
B – A = negative result (preload)
Tolerances: Max. allowed clearance dimension
35.
unit. Tighten the allen bolts to 40 Nm (29 lb.ft.).
Grease the bearing box and install on the lower
0.05
mm (0.002”)
Max. allowed preload 0.02 mm (0.0008”)
A clearance dimension of 0.02 mm (0.0008”) shall be
aspiring to attain. When a clearance dimension is
reached, shims shall be added according to the follow-
ing example:
Example:
Measurement “B”
Measurement “A”
10.02 mm
– 9.78 mm
+
0.24 mm
(
clearance dimension)
A 0.24 mm shim should be placed on the outer bear-
ing race. This will give a remaining play of 0.04 mm
(0.0016”)
which is within the tolerances.
A
884348
36.
Place the outer bearing race on the vertical shaft
38. Insert the bearing race on the vertical shaft roller
bearing. Install shims between the bearing race and
the special tool to prevent the bearing from moving
axially. Install special tool 884348. Tighten the special
tool with two screws and nuts finger tight to prevent
axial movement but not enough to preload the vertical
shaft.
roller bearing and hold it steady in position. Use a
depth gauge to measure the height of the bearing as-
sembly “A.” Note this dimension.
114
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok