Transom shield
Trim cylinders, earlier models
Trim cylinders, later models
B
C
D
A
13.
Remove any shipping plugs installed in the new
14. Remove any shipping plugs installed in the new
trim cylinder.
trim cylinder.
Install the pipes and the hoses on the new trim
cylinder.
Install the pipes and the hoses on the new trim
cylinder. Hoses to starboard cylinder (A) and port
cylinder (B).
WARNING! Make sure all the pipes and hose fit-
tings are attached finger tight before torquing
any of the fittings. Final tightening of any of the
fittings before all fittings are started could cause
cross-threaded fittings and damage the cylinder.
WARNING! Make sure all the pipes and hose fit-
tings are attached finger tight before torquing
any of the fittings. Final tightening of any of the
fittings before all fittings are started could cause
cross-threaded fittings and damage the cylinder.
Install the sterndrive according to chapter Installing
the Sterndrive.
Raise and lower the sterndrive several times to bleed
any air trapped in the hydraulic system.
15a. Port cylinder:
Remove the block off plugs from the old cylinder and
install in the same holes of the new cylinder.
Install the ground strap insert (C), attach the ground
strap to the insert.
WARNING! Be sure there is good electrical con-
tact (low resistance) between the trim cylinders
and the transom shield. High resistance be-
tween the transom shield and the trim cylinders
will result in corroded trim cylinders. For more
information on electrochemical corrosion, con-
sult publication 7733534-7 Marine Electrical
Systems available from Volvo Penta parts.
15b.
Starboard cylinder:
Install the plastic plug (D).
Install the sterndrive according to chapter Installing
the Sterndrive.
Raise and lower the sterndrive several times to bleed
any air trapped in the hydraulic system.
145
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok