Repair instructions
1
3.
39.50
The nominal measurement of the forward gear is
mm. The tolerance (±) is engraved on the gear.
All engraved numbers are decimal millimeters. In this
instance, “-10” equals -0.10 mm. The real measure-
ment of the gear is 39.50 - 0.10 = 39.40 mm.
884793
Add the height of the forward roller bearing to the real
measurement of the forward gear:
Add:
Roller Bearing =
20.85 mm
+ 39.40 mm
60.25 mm
4.
Lubricate the bearing position before assembly.
Forward Gear =
Place the calculated shim thickness in the gear hous-
ing and install the outer bearing race (marked 30209)
with special tool 884795.
Total forward gear length
This sum should be subtracted from the
G”-stamping resulting in a shim thickness for the
front bearing:
NOTE! The plastic disk (1) should be pressed as far
in as possible on the tool.
“
G-measurement
60.85 mm
- 60.25 mm
00.60 mm
Total forward gear length
Shim Thickness =
884801
5.
Press on the front roller bearing onto the forward
gear. Use special tool 884801. Use special tool
to protect gear teeth.
884797
106
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok