Trim system
3.
Turn the gear wheel until the tooth with a white re-
cessed marking appears.
6.
Install the screw and carefully tighten.
NOTE! It is recommended that a new screw be used
whenever the gear rack is removed.
WARNING! Do not overtighten the screw. Use
extreme caution to prevent stripping the
threads from the screw.
4.
Install the new gear rack with the marked tooth of
the gear wheel in the first slot of the gear rack.
7.
Lower the sterndrive to its bottom position. Ensure
the sterndrive is at its lowest position, place a 15 kg
load on the rear of the sterndrive.
5.
Align the gear rack with the hole in the steering hel-
met. Push the nut (1) through the helmet and into the
gear rack.
152
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok