Repair instructions
884265
884386
13.
Press out the bearings of the bearing sleeves.
15. Remove the collar washer (1) from the double
Use special tools 884386 and 884265.
bearing box.
NOTE! Take care of the shims (2).
Input gear (Double bearing box)
16.
Remove the locking ring (1) and the sealing (2).
NOTE! Always replace the sealing!
884259
14.
Remove the Allen-head screw (1) and the collar
washer (2) in the center of the universal joint shaft.
Pull out the universal joint and push out the double
bearing box (3) from the clamping ring (4). Use a
rubber mallet if necessary.
NOTE! Do not damage or lose the shims!
884386
17.
Press out the input gear. Use special tools 884386
and 884259.
33
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok