Repair instructions
884793
884263
8.
Press a new inner bearing race onto the vertical
shaft. Use special tool 884793.
884799
6.
Use special tool 884263 to press the gear and bear-
ing assembly onto the propeller shaft. Use special tool
to protect the bearing.
884799
884266
WARNING! Do not press on by using the
bearing race!
Shimming the vertical shaft
9.
Press a new ball bearing onto the vertical shaft
special tool 884266.
864241
NOTE! Install the bearing so that the thick part of the
inner race faces up.
884266
884792
1
7.
Grease the bearing location. Carefully align the nee-
dle bearing when installing it in the gear housing.
Use special tool 884792 in combination with 884241.
Turn the bearing to allow the tool 884792 to press
against the text on the bearing. Tighten the screw
until the bearing bottoms.
10.
press on the roller bearing. Use special tool 884266.
Place the thin spacer pad (1) on the ball bearing
107
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok