Repair instructions
9991801
884259
5.
the cotter pin (1). Remove the shaft (2) and remove
the shift yoke (3). To install reverse procedure.
Should the shift fork require replacement, remove
7. Grease the lower hook up fork bushing with Volvo
Penta part np. 828250-1 water resistant grease. Using
special tool 884259 and 9991801, press in the bush-
ing.
NOTE! Always use a new cotter pin when reinstall-
ing.
9991801
884259
6.
special tool 884140 and 884143. Also replace the O-
rings (1). One on each side of the oil tube.
Remove the bearing race of the axial bearing. Use
8. Press the bushing into the hook up fork. Use spe-
cial tools 884259 with handle 9991801.
83
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok