Removing the sterndrive
8b. Sterndrive model 290: Remove the two locking
screws holding the shaft journals in the transom
shield. Support the sterndrive from underneath and
knock out the shaft journals using a brass drift or
some similar tool. Lift off the sterndrive and place it in
a suitable cradle.
7b. Sterndrive model 290: Remove the steering hel-
met and the universal joint rubber bellows from the up-
per gear housing (1), the exhaust bellows from the in-
termediate housing (2) and the cooling water hose
from the cooling water connection (3). The universal
joint rubber bellows must be replaced every other
year.
NOTE! Always replace the bushings (1).
8a. Sterndrive models 280 and 285: Remove the two
locking screws holding the shaft journals in the tran-
som shield. Support the sterndrive from underneath
and pull out the shaft journals, using special tool
884874
. A brass drift can also be used. Lift off the
sterndrive and place it in a suitable cradle.
NOTE! Always replace the bushings (1).
24
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok