Repair instructions
Assembly
Oil all moving parts prior to assembly.
11.
O-ring (3) and coat the contact surfaces with sealing
compound, Volvo Penta part no. 1161099-5, or
Permatex no. 3.
®
Install the spring (1), the sliding shoe (2) and the
9.
with the steel edge (small clearance) facing inwards
the gear housing.
Lubricate the sealing ring abundantly and install it
12.
a way that the screw (1) is displaced towards star-
board.
Install the shift mechanism in the gear housing in
10.
and lock it with the load pin (3). Make sure that the
load pin centers in the excentric piston.
Install the excentric piston (1). Install the pin (2)
NOTE! Make sure that the sliding shoe (2) is turned to
a position corresponding the one in the picture. The
shift mechanism will not function if the sliding shoe is
turned the opposite way.
67
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok