Repair instructions
5.
Use new screws and washers. Coat the screw
threads with thread locking compound, Volvo Penta
part no. 1161053-2, or Loctite
®
243.
Tighten the 4 larger screws diagonally and in se-
quence with a torque wrench to 38 Nm (28 lb.ft.). Use
special tool 885008. Tighten the 3 smaller screws to
15
Nm (11 lb.ft.).
280
drives:
Earlier 280 drives do not have washers while later ver-
sions do. Both versions of the 280 drive shall always
have washers fitted to all bolts between the lower and
intermediate housing when overhauling. Tightening
torque; see above.
290
drives:
All production 290 drives have washers fitted. Tighten-
ing torque; see above.
121
| Categories | Volvo Penta Manuals |
|---|---|
| Tags | Volvo Penta 280, Volvo Penta 280-DP, Volvo Penta 285, Volvo Penta 290, Volvo Penta 290-DP, Volvo Penta DP-A, Volvo Penta DP-B, Volvo Penta DP-C, Volvo Penta SP-A, Volvo Penta SP-C |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(9 votes, average: 4.22 out of 5)
Marine readers have rated Volvo Penta 280 285 290 DP SP A B C Workshop Manual 4.2 out of 5.0 based on 9 product reviews. Problem Winther noise when turne
not pulling water so hope I find the info
Kinda a premature review, at this point I am asked to review the manual before ever seeing it?
Great step by step information.
thank you
needed it bad
ok