VELVET DRIVE 5000V V-DRIVE TRANSMISSION
SERVICE MANUAL NUMBER 23
Filling Transmission
IMPORTANT: Use only specified automatic transmission fluid (see “Specifications”).
1.
Remove dipstick. Fill transmission with fluid, through dipstick hole, to bring up to full
mark.
a
b
c
73250
a - Dipstick
b - Full Mark
c - Dipstick Tube
IMPORTANT: To accurately check fluid level, run engine at 1500 RPM for 2 minutes
immediately prior to checking level.
2.
Start engine and run at 1500 RPM for 2 minutes to fill all hydraulic circuits.
NOTE: Be sure to push dipstick all the way down into dipstick tube when checking fluid level.
3.
4.
Stop engine and quickly check fluid level. Add automatic transmission fluid, if necessary,
to bring level up to full mark on dipstick.
Reinstall dipstick. Be sure to tighten T-handle securely.
Removal
NOTICE to INSTALLER
The following procedure describes removal of transmission without removing en-
gine. If engine must be removed, refer to Section 2 (see “Table of Contents”).
1.
Drain transmission fluid,
2.
3.
4.
5.
6.
7.
8.
Disconnect fluid cooler hoses.
Disconnect shift cable.
Disconnect wires from neutral start safety switch.
Disconnect wires from fluid temperature switch.
Disconnect propeller shaft coupling.
Remove four rear mount (to engine bed) bolts.
Support rear part of engine with either a hoist or by using wooden blocks under flywheel
housing.
9.
Remove two center transmission-to-flywheel housing attaching bolts and install two
long studs.
IMPORTANT: These two long studs will help support weight of transmission during
removal and installation.
Index
Page 8C-12
90-861326--1 MARCH 1999
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated Mercury MerCruiser GM V8 GM V8 454 CID 7.4L and 502 cid 8.2L Marine Engines Service Manual Number 23 5.0 out of 5.0 based on 1 product reviews. Just need the manual. Wrote review. Can't technically review what I haven't seen yet...