CHARGING SYSTEM
SERVICE MANUAL NUMBER 23
IMPORTANT: DO NOT clamp vise on rotor pole pieces when removing pulley nut (in
next step), as pole pieces may be distorted.
12.
Remove pulley retaining nut by clamping pulley in a vise (using an old belt or protective
jaws to protect pulley) and turning nut counterclockwise with a wrench. Remove
lockwasher, slide pulley and fan from shaft. If pulley is difficult to remove, it may be
necessary to use a universal puller.
b
a
72828
a - Wrench
b - Old Belt To Protect Pulley
13.
Remove the three phillips head screws and lockwashers which secure the front bearing
retaining plate.
a
b
72829
a - Phillips Head Screws and Lockwashers
b - Front Bearing Retaining Plate
14.
Remove front bearing from front end frame using an arbor press and a suitable size
mandrel. Discard bearing.
a
b
c
72830
a - Press
b - Mandrel
c - Bearing
15.
If rotor slip rings or rear bearing requires replacement, entire rotor must be replaced.
Parts cannot be purchased separately.
Page 4C-18
90-861326--1 MARCH 1999
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated Mercury MerCruiser GM V8 GM V8 454 CID 7.4L and 502 cid 8.2L Marine Engines Service Manual Number 23 5.0 out of 5.0 based on 1 product reviews. Just need the manual. Wrote review. Can't technically review what I haven't seen yet...