SERVICE MANUAL NUMBER 23
FUEL INJECTION SYSTEM TROUBLESHOOTING
Backfire Symptom (Continued)
1.
Check for proper operation of Igni-
tion Control (IC) circuit and the
Knock Sensor (KS) circuit.
If a problem is found, repair as nec-
essary.
7
8
2.
Go to OBD
System
Check
Was a problem found?
-
Go to Step 8
1.
Check integrity of the primary and
secondary wiring.
Check routing of the wiring.
Check condition of IC module,
pick-up coil, distributor cap, rotor
and spark plug wires.
2.
3.
4.
If a problem is found, repair as nec-
essary.
Go to OBD
System
Check
Was a problem found?
-
-
Go to Step 9
Go to Step 10
1.
Check ignition coil for cracks or car-
bon tracking.
9
2. If a problem is found, repair as nec-
essary.
Was a problem found?
Go to OBD
System
Check
1.
Check for proper ignition voltage
input to the ECM.
2.
Check for intermittent open or short
to ground on the ignition voltage
input circuit to the ECM.
10
3.
If a problem is found, repair as nec-
essary.
Go to OBD
System
Check
Was a problem found?
-
Go to Step 11
1.
Remove spark plugs, check for wet
plugs, cracks, wear, improper gap,
burned electrodes or heavy depos-
its.
•
Refer to Distributor Ignition System
in “Description and System Opera-
tion” section.
11
NOTE: If park plugs are gas or oil fouled,
the cause of the fouling must be deter-
mined before replacing the spark plugs
2.
If a problem is found, repair as nec-
essary.
Go to OBD
System
Check
Was a problem found?
-
Go to Step 12
Index
90-861326--1 MARCH 1999
Page 5D-31
Product Specification
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
Model Year | 1998, 1999, 2000, 2001 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Just need the manual. Wrote review. Can't technically review what I haven't seen yet...