SERVICE MANUAL NUMBER 23
MULTI-PORT FUEL INJECTION DESCRIPTIONS AND SYSTEM OPERATION
IDLE AIR CONTROL (IAC) VALVE
The purpose of the IAC valve assembly is to control engine idle speed, while preventing
stalls due to changes in engine load. The IAC valve, mounted on the throttle body, controls
bypass air around the throttle valves.
72800
Moving a pintle IN, toward the seat (to decrease air flow), or OUT, away from the seat (to
increase air flow), controls the amount of air moving around the throttle valve. If rpm is too
low, more air is bypassed around the throttle valve to increase it. If rpm is too high, less air
is bypassed around the throttle valve to decrease it.
The ECM moves the IAC valve in small steps, called counts. These can be measured by
scan tool test equipment, which plugs into the DLC connector.
During idle, the proper position of the IAC valve is engine load, and engine rpm. If the rpm
drops below specification and the throttle valve is closed, the ECM senses a near stall condi-
tion and calculates a new valve position to prevent stalling.
•
Engine idle speed is a function of total air flow into the engine based on IAC valve pintle
position.
•
“Controlled” idle speed is programmed into the ECM, which determines the correct IAC
valve pintle position to maintain the desired idle speed for all engine operating condi-
tions and loads.
•
•
The minimum idle air rate is set at the factory with stop screws. This setting allows
enough air flow by the throttle valves to cause the IAC valve pintle to be positioned a
calibrated number of steps (counts) from the seat during “controlled” idle operation.
If the IAC valve is disconnected and reconnected with the engine running, the idle speed
may be wrong. In this case, the IAC valve can be reset by doing the following: Turn off
engine, wait ten seconds, and restart engine.
90-861326--1
MARCH 1999
Page 5B-41
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated Mercury MerCruiser GM V8 GM V8 454 CID 7.4L and 502 cid 8.2L Marine Engines Service Manual Number 23 5.0 out of 5.0 based on 1 product reviews. Just need the manual. Wrote review. Can't technically review what I haven't seen yet...