Mercury MerCruiser GM V8 GM V8 454 CID 7.4L and 502 cid 8.2L Marine Engines Service Manual Number 23

SERVICE MANUAL NUMBER 23
VELVET DRIVE 5000V V-DRIVE TRANSMISSION
Transmission Fluid Capacities
MODEL
U.S. QTS. (LITERS)
5000V
3 (2-3/4) 1
1
Use dipstick to determine fluid exact level.
Warm Fluid Level Check: The transmission should be at operating temperature [190° F(90° C)] maximum to
receive an accurate oil level reading.
Cold Fluid Level Check: To ease checking fluid level, the dipstick can be marked or scribed. First the procedure
for warm fluid level must be performed, then allow boat to sit overnight. Remove and wipe clean  the dipstick.
Insert clean dipstick and mark the cold fluid level.
Transmission Pressure Specifications
Neutral Gear PSI
(kPa)
Forward Gear PSI
(kPa)
Reverse Gear PSI
(kPa)
Engine
RPM
MIn.
Max.
Min.
Max.
Min.
Max.
250
600
70 (483)
70 (483)
115 (793)     135 (931)     115 (793)     140 (965)    120  (827)    140 (965)
2000
3000
125 (862)    160 (1103)    125 (862)    160 (1103)
135 (931)    180 (1241)
Transmission Fluid Specification
5000V
Automatic Transmission Fluid Dexron III or Equivalent
Important Information
Shift Control and Cables
CAUTION
Shift control and shift cable must position transmission shift lever exactly as stated
in this manual, or transmission, as a result of improper shift lever positioning, will
not be covered by Velvet Drive Warranty.
IMPORTANT: Velvet  Drive Warranty is  jeopardized if the  shift lever poppet  ball or
spring is permanently  removed, or if shift lever  is repositioned or changed  in any
manner.
Remote control also must provide a total shift cable travel (at transmission end) of at least
2-3/4
in. (70 mm). This is necessary to position transmission shift lever fully in the forward
and reverse gear positions. Insufficient shift cable travel will cause transmission to slip and
eventually fail.
Engine
Engine rotation is indicated on engine specifications and serial number decal on the engine.
Engine rotation is described when observed from the rear of the engine (transmission end)
looking forward (water pump end).
Installed angle of MIE inboard transmission and engine should not exceed a maximum of
18
° of the water line.
Index
90-861326--1
MARCH 1999
Page 8C-3
Product Specification
CategoriesMercury MerCruiser Manuals
Tags,
Model Year1998, 1999, 2000, 2001
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 1027 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Marine readers have rated Mercury MerCruiser GM V8 GM V8 454 CID 7.4L and 502 cid 8.2L Marine Engines Service Manual Number 23 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Mercury MerCruiser GM V8 GM V8 454 CID 7.4L and 502 cid 8.2L Marine Engines Service Manual Number 23 SKU UPC Model
Matt on Apr 08, 2015.

Just need the manual. Wrote review. Can't technically review what I haven't seen yet...


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website