MAINTENANCE
SERVICE MANUAL NUMBER 23
Transmission Fluid
Checking Fluid Level
NOTE: Due to the various installation angles and oil cooler set-ups, it may be necessary to
adjust oil level.
WARNING
Do not remove dipstick with engine running. Hot oil can cause burns.
CAUTION
Clean around the area of the dipstick before removing. Small particles of dirt can
cause damage to internal components and cause valves to stick.
IMPORTANT: DO NOT allow fluid level to drop below the bottom line.
72526
TRANSMISSION WARM
The transmission should be at operating temperature (190° maximum) to get an accurate
oil level reading. Oil will expand when heated. Oil will drain back from the cooler. Expansion
and drain-back can significantly affect oil level.
1.
2.
3.
4.
When the transmission is at operating temperature, place selector lever in neutral.
Shut off engine.
Carefully remove dipstick and wipe clean.
Immediately insert clean dipstick and read oil level.
NOTE: Oil level must be checked immediately after engine shut-down to prevent an incor-
rect reading. Oil drains back into the transmission from the cooler and cooler lines.
5.
Add or remove oil as necessary until the oil is at the required mark.
Index
Page 1B-32
90-861326--1 MARCH 1999
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated Mercury MerCruiser GM V8 GM V8 454 CID 7.4L and 502 cid 8.2L Marine Engines Service Manual Number 23 5.0 out of 5.0 based on 1 product reviews. Just need the manual. Wrote review. Can't technically review what I haven't seen yet...