SERVICE MANUAL NUMBER 23
IGNITION SYSTEM
4.
Inspect each plug individually for badly worn electrodes, glazed, broken or blistered
porcelain and replace where necessary.
a
b
c
f
d
e
72734
a - Porcelain Insulator
b - Insulator - Cracks Often Occur at This Point
c - Shell
d - Proper Gap
e - Side Electrode
f - Center Electrode (When Adjusting Gap - DO NOT Bend)
REPLACING
IMPORTANT: Tapered seat spark plugs are not interchangeable with non-tapered
(with gasket) spark plugs. Do not use gaskets on tapered seat plugs.
1.
Clean the plug seating area on the cylinder heads. Clean the tapered seat area of each
tapered seat spark plug.
2.
Adjust spark plug gap with a round feeler gauge. Bend side electrode to adjust gap.
Refer to “Specifications” in SECTION 1B, for correct spark plug gap.
a
b
75084
a - Seating Area
b - Gap
IMPORTANT: It is recommended that spark plugs be torqued to the amount specified.
In the absence of a torque wrench or access problems to the plugs, the spark plugs
should be hand tightened until the plug seats on the cylinder head. Then, securely
tighten with appropriate wrench and socket. On tapered seat plugs, only slight rota-
tion (approximately 1/8 or less of a full turn) after seating, is required to create a seal
and secure the plug.
3.
Install spark plugs and torque to specifications. Refer to “Torque Specifications,” in this
section.
4.
Install spark plug wires in proper order. Refer to “Engine Rotation and Firing Order”
and/or “Spark Plug Wires,” following.
Index
90-861326--1
MARCH 1999
Page 4B-5
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated Mercury MerCruiser GM V8 GM V8 454 CID 7.4L and 502 cid 8.2L Marine Engines Service Manual Number 23 5.0 out of 5.0 based on 1 product reviews. Just need the manual. Wrote review. Can't technically review what I haven't seen yet...