SERVICE MANUAL NUMBER 23
MULTI-PORT FUEL INJECTION DESCRIPTIONS AND SYSTEM OPERATION
7.4L
MPI Multi-Port Injection Components
FUEL PUMP ELECTRICAL CIRCUIT
When the ignition switch is turned to the RUN position, the ECM will turn ON the fuel pump
relay for two (2) seconds.
When the ignition switch is turned to the crank position, the ECM turns the fuel pump relay
ON causing the fuel pump to start.
If the ECM does not receive ignition reference pulses (engine cranking or running), it shuts
OFF the fuel pump relay, causing the fuel pump to stop.
FUEL RAIL / INTAKE MANIFOLD ASSEMBLY
The fuel rail performs several functions. It positions the injectors in the intake manifold, dis-
tributes fuel evenly to the injectors.
d
a
b
c
75615
a - Fuel Rail
b - Fuel Injector
c - Intake Manifold
d - Plenum
FUEL INJECTORS
TheEFIinjectorassemblyisasolenoid-operateddevice,controlledbytheECM,thatmeters
pressurized fuel to a single engine cylinder. The ECM grounds the injector solenoid, which
opens a pintle valve, allowing fuel to flow past the pintle valve. The injector tip has holes that
control the fuel flow, generating a conical spray pattern of finely atomized fuel at the injector
tip. Fuel is directed at the intake valve, causing it to become further atomized and vaporized
before entering the combustion chamber.
An injector that is stuck partly open will cause loss of pressure after engine shutdown. This
canresultinlongcrankingtimes.Dieselingordelayedshutoffcanalsooccur,becausesome
fuel might be delivered to the engine after the ignition is turned OFF.
90-861326--1
MARCH 1999
Page 5B-39
Product Specification
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
Model Year | 1998, 1999, 2000, 2001 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
Just need the manual. Wrote review. Can't technically review what I haven't seen yet...