454
CID (7.4L) / 502 CID (8.2L)
SERVICE MANUAL NUMBER 23
IMPORTANT: Do not turn the crankshaft with the gauging plastic installed.
72362
6.
If the clearance exceeds specifications, select a new, correct size bearing and measure
the clearance.
Be sure to check what size bearing is being removed in order to determine proper replace-
ment size bearing. If clearance cannot be brought to within specifications, the crankpin will
have to be ground undersize. If the crankpin is already at maximum undersize, replace
crankshaft.
7.
Coat the bearing surface with oil. Install the rod cap and torque nuts as follows:
7.4L
454/502/8.2L
MPI
47 lb-ft (64 Nm)
73 lb-ft (99 Nm).
MPI
8.
9.
When all connecting rod bearings have been installed, tap each rod lightly (parallel to
the crankpin) to make sure they have clearance.
Measure all connecting rod side clearances (see “Specifications”) between connecting
rod caps as shown.
72555
Index
Page 3A-66
90-861326--1 MARCH 1999
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | Mercury MerCruiser 454 CID, Mercury MerCruiser 502 CID |
| Model Year | 1998, 1999, 2000, 2001 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Marine readers have rated Mercury MerCruiser GM V8 GM V8 454 CID 7.4L and 502 cid 8.2L Marine Engines Service Manual Number 23 5.0 out of 5.0 based on 1 product reviews. Just need the manual. Wrote review. Can't technically review what I haven't seen yet...