REMOVAL, INSTALLATION AND ADJUSTMENTS
SERVICE MANUAL NUMBER 28
3.
Install sterndrive unit shift cable.
b
a
c
71658
a - Washers (2)
b - Locknut-Tighten Until Contact, Then Loosen 1 Turn
c - Cotter Pin-Insert from Top and Spread Both Ends
4.
Place adjustment tool over sterndrive unit shift cable, as shown. Hold tool in place over
the barrel retainer with a piece of tape.
71659
Locate center of remote control and control cable play (backlash).
a. Shift remote control to NEUTRAL.
5.
b. Push in on control cable end with enough pressure to remove play, and mark
position “a” on tube.
c. Pull out on control cable end with enough pressure to remove play and mark position
“b” on tube.
d. Measure distance between marks “a” and “b”. Then, mark position “c” half-way
between marks “a” and “b.”
c
b
a
71656
IMPORTANT: Be sure to keep center mark “c” aligned with control cable end guide
edge when making the following adjustment.
INDEX
Page 2A-30
90-863160 MAY 2000
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | MerCruiser Sterndrives 90-863160 |
| Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Marine readers have rated Mercury MerCruiser Bravo Outdrives Sterndrives Marine Engines Service Manual Number 28 3.0 out of 3.0 based on 1 product reviews. I could not find any mention of the seawater pump assembly.
Maybe I have the wrong unit