REMOVAL, INSTALLATION AND ADJUSTMENTS
SERVICE MANUAL NUMBER 28
12.
Connect the power steering assembly to the transom.
a. Lubricate bushings with Special Lubricant 101.
a
71901
a - Bushings
b. Slide the power steering cylinder bushings between the transom mounting brackets.
Tighten the two pivot bolts by hand. At the same time, move the steering assembly
slightly to ensure proper pin engagement into the pivot bushings.
c. Ensure that the washer tangs straddle the ridges on the inner transom plate.
a
b
b
a
22033
a - Pivot Bolt
b - Washer Tang
d. Torque the pivot bolts to 25 lb-ft (34 Nm). Bend the washer tabs against the
corresponding flats on both pivot bolt heads.
e. Make sure the power steering control valve pivots freely.
Connect the power steering clevis to the steering lever.
a. Lubricate the clevis pins with Special Lubricant 101.
b. Install the clevis pin in the clevis from the top.
13.
c. Secure the pin in the clevis with a cotter pin. Spread the cotter pin ends.
14.
15.
Lubricate the steering cable end with a liberal amount of Special Lubricant 101 and
install the cable through the guide.
Start the coupler nut on the tube. Do not tighten at this time.
INDEX
Page 2A-18
90-863160 MAY 2000
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | MerCruiser Sterndrives 90-863160 |
| Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Marine readers have rated Mercury MerCruiser Bravo Outdrives Sterndrives Marine Engines Service Manual Number 28 3.0 out of 3.0 based on 1 product reviews. I could not find any mention of the seawater pump assembly.
Maybe I have the wrong unit