SERVICE MANUAL NUMBER 28
BRAVO THREE GEAR HOUSING
16.
Check pinion height as follows:
a. Insert shimming tool into gear housing.
b. Measure clearance between tool and pinion gear with feeler gauge. Clearance must
be .023-.028 in. (0.575-0.700 mm). Take measurement at three locations on pinion
gear (120 degrees apart).
b
a
72268
a - Shimming Tool (P/N 91-805462T)
b - Feeler Gauge
RATIO
DRIVE
DRIVEN
DRIVEN
Use Tool Position 16:27
2.43:1
2.20:1
2.00:1
1.81:1
1.65:1
13
16
16
16
18
24
27
27
27
25
24
27
27
27
25
Use Tool Position 15:19
1.50:1
1.36:1
15
15
19
19
19
19
If clearance is less than specified, add appropriate thickness of shims under lower tapered
roller bearing cup.
Any thickness added here must be subtracted from shim thickness at upper bearing.
If clearance is more than specified, remove appropriate thickness of shims from under lower
tapered roller bearing cup.
INDEX
90-863160
MAY 2000
Page 3D-35
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | MerCruiser Sterndrives 90-863160 |
| Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Marine readers have rated Mercury MerCruiser Bravo Outdrives Sterndrives Marine Engines Service Manual Number 28 3.0 out of 3.0 based on 1 product reviews. I could not find any mention of the seawater pump assembly.
Maybe I have the wrong unit