ACCESSORIES - ALL MODELS
SERVICE MANUAL NUMBER 28
Shift Cable Replacement and Adjustment
Installation Preparation
If installing a new shift cable(s), complete the hookup to the remote control and route the
shift cable(s) before starting the following procedures.
Shift Cable Barrel Adjustment
1.
Shift the remote control into NEUTRAL.
2.
Push in on the input shift cable end guide with enough pressure to remove free-play and
mark position “a” on the tube.
3.
4.
Pull out on the input shift cable end guide with enough pressure to remove free-play and
mark position “b.”
Measure the distance between marks “a” and “b,” then mark position “c” halfway be-
tween them. Position “c” marks the center of free-play.
5.
6.
Position the cable end guide at the center of free-play.
Adjust the barrel so that the distance between the centerline of the cable end guide
mounting hole, and the centerline of the cable barrel hole is 71/16 in. (179 mm) apart (with
the end guide in position “c”).
b
c
7 in.
1/16
a
c
22024
a - Position “a”
b - Position “b”
c - Position “c”
INDEX
Page 8A-14
90-863160 MAY 2000
Product Specification
Categories | Mercury MerCruiser Manuals |
---|---|
Tags | MerCruiser Sterndrives 90-863160 |
Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
Download File |
|
Document File Type | |
Copyright | Attribution Non-commercial |
I could not find any mention of the seawater pump assembly.
Maybe I have the wrong unit