OILDYNE TRIM PUMP
SERVICE MANUAL NUMBER 28
IN/DOWN SOLENOID
1.
2.
Connect a jumper between the positive (+) solenoid terminal and the green/white har-
ness wire terminal.
The motor should run.
b
a
c
d
22494
a - IN/DOWN Solenoid
b - Positive (+) Solenoid Terminal
c - GREEN/WHITE Harness Wire Terminal
d - Jumper Wire
3.
If the pump motor does not run in one direction or another, replace the appropriate sole-
noid.
NOTE: See the wiring diagram on page 5A-51.
Solenoid Test (Pump Out of Boat)
WARNING
DO NOT perform this test near flammables or explosives as a spark may occur when
making connections.
1.
Remove the trim pump from the boat. Refer to “Trim Pump Removal.”
Remove the fluid from the trim pump reservoir.
2.
OUT/UP SOLENOID
1.
2.
Connect a 12 volt Positive (+) supply lead to blue-white harness terminal wire.
Connect the negative (–) supply lead to the solenoid ground terminal as shown.
INDEX
Page 5A-20
90-863160 MAY 2000
| Categories | Mercury MerCruiser Manuals |
|---|---|
| Tags | MerCruiser Sterndrives 90-863160 |
| Model Year | 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(1 votes, average: 3 out of 3)
Marine readers have rated Mercury MerCruiser Bravo Outdrives Sterndrives Marine Engines Service Manual Number 28 3.0 out of 3.0 based on 1 product reviews. I could not find any mention of the seawater pump assembly.
Maybe I have the wrong unit